Pipe Heat Loss Calculator | ASTM C680 & Crane TP-410
Pipe Heat Loss Calculator
Thermal Analysis per ASTM C680 & Crane TP-410
1. Installation & Environment
°C
m/s
Advanced Environment Settings (ε)
—
Typical: aluminum jacketing 0.05–0.2; painted steel 0.8–0.95.
2. Process Fluid
kPag
°C
kg/h
Fluid Properties (Density, Cp, k, µ)
kg/m³
kJ/kgK
W/mK
cP
3. Pipe Geometry
m
4. Insulation System
mm
Thermal Performance Results
Total Heat Loss (Q):
--
Outlet Temperature:
--
Surface Temperature:
--
Heat Transfer Analysis
Linear Heat Loss:--
Heat Flux (Surface):--
Overall U-Value (OD):--
Insulation Efficiency:--
Hydraulic Analysis
Flow Regime:--
Reynolds Number:--
Velocity:--
Pressure Drop:--
Temperature Profile
Inlet (0m)
Length (L)
Outlet
Technical Notes
Variable Definitions
- Tin, Tout: inlet and outlet bulk fluid temperatures (°C).
- Tamb: ambient air/soil temperature (°C).
- Q: total heat loss over length L (W).
- q′: linear heat loss (W/m).
- q″: surface heat flux based on outer diameter (W/m²).
- Uo: overall heat transfer coefficient based on pipe OD area (W/m²·K).
- hi: internal convection coefficient (W/m²·K).
- hconv, hrad: external convection and radiation coefficients (W/m²·K).
- R: thermal resistances per meter (K/W·m) combined in series.
- Re, Pr: Reynolds and Prandtl numbers (dimensionless).
- f: Darcy friction factor (dimensionless); ΔP: pressure drop (kPa).
Formulas / Logic
- Overall resistance (per meter): R = Ri + Rwall + Rins + Ro
- Internal convection: Nu via laminar developing (Hausen-type) and Gnielinski for turbulent; hi=Nu·k/D.
- External forced convection (air): Churchill–Bernstein correlation for cylinder crossflow.
- External natural convection (air): Churchill–Chu (horizontal cylinder) when wind is low.
- Radiation (linearized): hrad=εσ(Ts²+Ta²)(Ts+Ta).
- Buried case (soil conduction): Rsoil=ln(2H/r)/(2πksoil) (depth to center H, radius r).
- Outlet temperature (energy balance): Tout=Tamb+(Tin-Tamb)·exp(-UA/(ṁCp)).
- Pressure drop: ΔP=f(L/D)·(ρv²/2), with f from Churchill correlation (laminar 64/Re).
The tool iterates to find a consistent outer surface temperature
because hconv and hrad depend on film and
surface temperature.
Assumptions / Notes
- Screening-level steady-state model with constant properties (use best-estimate properties at mean temperature for improved accuracy).
- Gas density is estimated by ideal gas law using inlet P and T (compressibility not included).
- Buried model uses a simplified conduction shape factor; does not include soil moisture change, groundwater, or thermal contact resistance.
- For personnel protection, common practice limits surface temperature (e.g., 60°C touch-safe screening) — confirm project criteria.
Standards / References
- ASTM C680 (thermal analysis for insulation systems) and common industrial practice.
- Crane TP-410 and standard heat transfer correlations (Churchill–Bernstein; Churchill–Chu; Gnielinski).
- Pipe dimensions are based on embedded subsets of ASME B36.10/B36.19 dimensional data.